中文 Россия Español Française العربية
http://www.mffurnace.com/

News

Contact

Mob: +86 136-5636-1386

Email:info@jhxjd.com
 

Position: Home > News > Industry News
Industry News

Induction melting Furnace

Hits:  UpdateTime:2015-12-04 14:36:32  【Printing】  【Close

Induction melting Furnace
An induction furnace is an electrical furnace in which the heat is applied by induction heating of metal. The advantage of the induction melting furnace is a clean, energy-efficient and well-controllable melting process compared to most other means of metal melting. Most modern foundries use this type of furnace and now also more iron foundries are replacing cupolas with induction melting furnaces to melt cast iron, as the former emit lots of dust and other pollutants. Induction electric furnace capacities range from less than one kilogram to one hundred tonnes capacity and are used to melt iron and steel, copper, aluminium and precious metals. Since no arc or combustion is used, the temperature of the material is no higher than required to melt it; this can prevent loss of valuable alloying elements.[1] The one major drawback to induction furnace usage in a foundry is the lack of refining capacity; charge materials must be clean of oxidation products and of a known composition and some alloying elements may be lost due to oxidation (and must be re-added to the melt).

Operating frequencies range from utility frequency (50 or 60 Hz) to 400 kHz or higher, usually depending on the material being melted, the capacity (volume) of the furnace and the melting speed required. Generally, the smaller the volume of the melts, the higher the frequency of the furnace used; this is due to the skin depth which is a measure of the distance an alternating current can penetrate beneath the surface of a conductor. For the same conductivity, the higher frequencies have a shallow skin depth - that is less penetration into the melt. Lower frequencies can generate stirring or turbulence in the metal.

A preheated, 1-tonne electric furnace melting iron can melt cold charge to tapping readiness within an hour. Power supplies range from 10 kW to 15 MW, with melt sizes of 20 kg to 30 tonne of metal respectively.

An operating induction furnace usually emits a hum or whine (due to fluctuating magnetic forces and magnetostriction), the pitch of which can be used by operators to identify whether the induction melting furnace is operating correctly or at what power level. 

Online 
Ruby